Tormek T-8 with HTK-906 Classic Hand Tool Kit
Save $100 compared with purchasing The Tormek T-8 Hand Tool Bundle. When sold out, the Classic Hand Tool Kit will no longer be available.
Bundle the T8 with the Hand Tool Kit
This bundle includes the Tormek T8 and the HTK-906 Hand Tool Kit with Classic SVX-150 Scissors Jig. This limited time special will end when we sell out of the Classic Hand Tool Kit.
The Tormek Hand Tool Kit is for just about anything that is broadly considered a hand tool. It includes jigs to sharpen knives, scissors, carving tools, and axes. This kit really extends the usefulness of the Tormek System.
Tormek Quality
The Tormek T8 sharpener has many imitators, but for those who understand the quality and versatility of this sharpener, there is no substitute. This sharpener has quality built into the design and a 8 year manufacturer's warranty shows the long-term commitment to quality. We are under no illusions that this is an inexpensive sharpener, owning a Tormek is a long-term commitment to sharp tools and knives.
The key word when sharpening the Tormek way is repeatability. The tools are guided in jigs and you remove only a minute fraction of the steel at each sharpening which makes it fast. An extra benefit is that your tools last longer. You can shape the tool exactly to your needs. Even such complicated shapes as fingernail turning gouges, spoon carving gouges and oval skew chisels with a radiused edge are easily sharpened. Once the shape is created, you can resharpen in less than a minute.
The water cooled slow speed grindstone is in harmony with the physical laws governing the steel tool -- the edge does not overheat and lose its hardness. You finish the sharpening process on the leather honing wheel, which lets you polish the edge to a razor sharpness. In addition, there is no grinding dust to pollute the air. The steel particles are deposited into the water trough. The Tormek method is safe. At the low speed, you can fully control the sharpening.
T8 Specifications:
 |
|
|---|---|
| Housing | Cast Zinc Top, Frame, Motor Mount and Internal Drive Wheel with ABS Plastic Sides |
| Grindstone | 250×50 mm (10"×2") |
| Leather honing wheel | 220×31 mm (8 5/8"×1 7/32") |
| Stone diameter indicator | Yes |
| Main shaft, nut and washer in stainless steel |
Yes |
| Carrying handle | Yes |
| Quick coupling for the honing wheel |
Yes |
| Honing with the SE-77 Square Edge Jig on the leather honing wheel |
Yes |
| Motor 115 V 1~ 60 Hz | 200 W (input) |
| Motor duty | Continuous |
| Running speed | 90 RPM |
| Width Depth Height |
270 mm (10 5/8") 270 mm (10 5/8") 330 mm (13") |
| Weight excl. packing | 32.6 lbs |
| Delivered with - Standard Grindstone SG-250 - Leather Honing Wheel LA-220 - Square Edge Jig SE-77 - AngleMaster WM-200 - Honing Compound PA-70 - Leather Wheel Oil - Handbook - Truing Tool TT-50 - Stone Grader SP-650 - T8 Water Trough - Storage Tray T8-00 |
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes |
| Optional grindstones - Blackstone Silicon SB-250 - Japanese Waterstone SJ-250 - Coarse Diamond DC-250 - Fine Diamond DF-250 -Extra Fine Diamond DE-250 |
Yes, Optional (View) Yes, Optional (View) Yes, Optional (View) Yes, Optional (View) Yes, Optional (View) |
| Warranty | 5 years + additional 3 on registration - Includes commercial use |
Tormek HTK-906 Hand Tool Kit with Classic SVX-150 Scissors Jig
The Tormek Case is a sturdy container with a clear sliding cover and a leather handle. Both stackable and easy to carry, these cases are great for organized storage at home or on the go.
The Hand Tool Kit Storage Tray is made of durable EPP, a durable construction material for years of use. With spots for all the jigs in the hand Tool Kit, the storage tray not only fits the Tormek Case, but is also compatible with the Tormek TS-740 Sharpening Station.
Sharpen Knives, Scissors, Carving Tools, and Axes
The Tormek Hand Tool Kit is for just about anything that is broadly considered a hand tool. It includes the jigs you'll need to sharpen knives, scissors, carving tools, and axes. This kit really extends the usefulness of any Tormek Sharpener.
| Hand Tool Kit Includes | |
 |
KJ-45 Centering Knife Jig For most knives. Width 45 mm (1 3/4"). Can be used on long blades. Min blade length 60 mm (2 3/8"). Also for drawknives. |
 |
KJ-140 Centering Long Knife Jig Suitable for long and flexible knives. The 140 mm (5 1/2") width of the jig stabilizes a thin blade. Min blade length 160 mm (6 1/4"). |
 |
SVM-00 Small Knife Holder Enables you to sharpen the smallest knife blades like carving knives and pocket knives. Works in conjunction with the KJ-45 and the older SVM-45. |
 |
SVX-150 Scissors Jig For scissors of all sizes and shears. Also suitable for portable electric hand planer blades. |
 |
SVS-38 Short Tool Jig For straight shanked carving gouges and V-tools down to 45 mm (1 3/4") length. Short wood chisels and tools for power carvers. Max. tool width 38 mm (1 1/2"). |
 |
AX-40 Axe Jig For carving and carpenter's axes. Will accommodate axe heads from 110mm (4 3/8") to 220mm (8 5/8") long, and 10mm (3/8") to 40mm (1 5/8") thick. |
 |
TC-800 Tormek Case Sturdy case, leather carrying handle, clear sliding lid. |
 |
HTK-00 Hand Tool Kit Storage Tray Holds all the jigs in the Hand Tool Kit and fits in the Tormek Case. |
Made in Sweden.
Q. Are these jigs compatible with any model Tormek Sharpener?
A. Yes. These jigs will work with both the Tormek T8, the Tormek T4 as well as older models like the T7, T3 and 2000.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Tormek T-8 with HTK-906 Classic Hand Tool Kit
Tormek T-8 with HTK-906 Classic Hand Tool Kit
Save $100 compared with purchasing The Tormek T-8 Hand Tool Bundle. When sold out, the Classic Hand Tool Kit will no longer be available.
Bundle the T8 with the Hand Tool Kit
This bundle includes the Tormek T8 and the HTK-906 Hand Tool Kit with Classic SVX-150 Scissors Jig. This limited time special will end when we sell out of the Classic Hand Tool Kit.
The Tormek Hand Tool Kit is for just about anything that is broadly considered a hand tool. It includes jigs to sharpen knives, scissors, carving tools, and axes. This kit really extends the usefulness of the Tormek System.
Tormek Quality
The Tormek T8 sharpener has many imitators, but for those who understand the quality and versatility of this sharpener, there is no substitute. This sharpener has quality built into the design and a 8 year manufacturer's warranty shows the long-term commitment to quality. We are under no illusions that this is an inexpensive sharpener, owning a Tormek is a long-term commitment to sharp tools and knives.
The key word when sharpening the Tormek way is repeatability. The tools are guided in jigs and you remove only a minute fraction of the steel at each sharpening which makes it fast. An extra benefit is that your tools last longer. You can shape the tool exactly to your needs. Even such complicated shapes as fingernail turning gouges, spoon carving gouges and oval skew chisels with a radiused edge are easily sharpened. Once the shape is created, you can resharpen in less than a minute.
The water cooled slow speed grindstone is in harmony with the physical laws governing the steel tool -- the edge does not overheat and lose its hardness. You finish the sharpening process on the leather honing wheel, which lets you polish the edge to a razor sharpness. In addition, there is no grinding dust to pollute the air. The steel particles are deposited into the water trough. The Tormek method is safe. At the low speed, you can fully control the sharpening.
T8 Specifications:
|
|
|---|---|
| Housing | Cast Zinc Top, Frame, Motor Mount and Internal Drive Wheel with ABS Plastic Sides |
| Grindstone | 250×50 mm (10"×2") |
| Leather honing wheel | 220×31 mm (8 5/8"×1 7/32") |
| Stone diameter indicator | Yes |
| Main shaft, nut and washer in stainless steel |
Yes |
| Carrying handle | Yes |
| Quick coupling for the honing wheel |
Yes |
| Honing with the SE-77 Square Edge Jig on the leather honing wheel |
Yes |
| Motor 115 V 1~ 60 Hz | 200 W (input) |
| Motor duty | Continuous |
| Running speed | 90 RPM |
| Width Depth Height |
270 mm (10 5/8") 270 mm (10 5/8") 330 mm (13") |
| Weight excl. packing | 32.6 lbs |
| Delivered with - Standard Grindstone SG-250 - Leather Honing Wheel LA-220 - Square Edge Jig SE-77 - AngleMaster WM-200 - Honing Compound PA-70 - Leather Wheel Oil - Handbook - Truing Tool TT-50 - Stone Grader SP-650 - T8 Water Trough - Storage Tray T8-00 |
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes |
| Optional grindstones - Blackstone Silicon SB-250 - Japanese Waterstone SJ-250 - Coarse Diamond DC-250 - Fine Diamond DF-250 -Extra Fine Diamond DE-250 |
Yes, Optional (View) Yes, Optional (View) Yes, Optional (View) Yes, Optional (View) Yes, Optional (View) |
| Warranty | 5 years + additional 3 on registration - Includes commercial use |
Tormek HTK-906 Hand Tool Kit with Classic SVX-150 Scissors Jig
The Tormek Case is a sturdy container with a clear sliding cover and a leather handle. Both stackable and easy to carry, these cases are great for organized storage at home or on the go.
The Hand Tool Kit Storage Tray is made of durable EPP, a durable construction material for years of use. With spots for all the jigs in the hand Tool Kit, the storage tray not only fits the Tormek Case, but is also compatible with the Tormek TS-740 Sharpening Station.
Sharpen Knives, Scissors, Carving Tools, and Axes
The Tormek Hand Tool Kit is for just about anything that is broadly considered a hand tool. It includes the jigs you'll need to sharpen knives, scissors, carving tools, and axes. This kit really extends the usefulness of any Tormek Sharpener.
| Hand Tool Kit Includes | |
|
KJ-45 Centering Knife Jig For most knives. Width 45 mm (1 3/4"). Can be used on long blades. Min blade length 60 mm (2 3/8"). Also for drawknives. |
|
KJ-140 Centering Long Knife Jig Suitable for long and flexible knives. The 140 mm (5 1/2") width of the jig stabilizes a thin blade. Min blade length 160 mm (6 1/4"). |
|
SVM-00 Small Knife Holder Enables you to sharpen the smallest knife blades like carving knives and pocket knives. Works in conjunction with the KJ-45 and the older SVM-45. |
|
SVX-150 Scissors Jig For scissors of all sizes and shears. Also suitable for portable electric hand planer blades. |
|
SVS-38 Short Tool Jig For straight shanked carving gouges and V-tools down to 45 mm (1 3/4") length. Short wood chisels and tools for power carvers. Max. tool width 38 mm (1 1/2"). |
|
AX-40 Axe Jig For carving and carpenter's axes. Will accommodate axe heads from 110mm (4 3/8") to 220mm (8 5/8") long, and 10mm (3/8") to 40mm (1 5/8") thick. |
|
TC-800 Tormek Case Sturdy case, leather carrying handle, clear sliding lid. |
|
HTK-00 Hand Tool Kit Storage Tray Holds all the jigs in the Hand Tool Kit and fits in the Tormek Case. |
Made in Sweden.
Q. Are these jigs compatible with any model Tormek Sharpener?
A. Yes. These jigs will work with both the Tormek T8, the Tormek T4 as well as older models like the T7, T3 and 2000.
Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Save $100 compared with purchasing The Tormek T-8 Hand Tool Bundle. When sold out, the Classic Hand Tool Kit will no longer be available.
Bundle the T8 with the Hand Tool Kit
This bundle includes the Tormek T8 and the HTK-906 Hand Tool Kit with Classic SVX-150 Scissors Jig. This limited time special will end when we sell out of the Classic Hand Tool Kit.
The Tormek Hand Tool Kit is for just about anything that is broadly considered a hand tool. It includes jigs to sharpen knives, scissors, carving tools, and axes. This kit really extends the usefulness of the Tormek System.
Tormek Quality
The Tormek T8 sharpener has many imitators, but for those who understand the quality and versatility of this sharpener, there is no substitute. This sharpener has quality built into the design and a 8 year manufacturer's warranty shows the long-term commitment to quality. We are under no illusions that this is an inexpensive sharpener, owning a Tormek is a long-term commitment to sharp tools and knives.
The key word when sharpening the Tormek way is repeatability. The tools are guided in jigs and you remove only a minute fraction of the steel at each sharpening which makes it fast. An extra benefit is that your tools last longer. You can shape the tool exactly to your needs. Even such complicated shapes as fingernail turning gouges, spoon carving gouges and oval skew chisels with a radiused edge are easily sharpened. Once the shape is created, you can resharpen in less than a minute.
The water cooled slow speed grindstone is in harmony with the physical laws governing the steel tool -- the edge does not overheat and lose its hardness. You finish the sharpening process on the leather honing wheel, which lets you polish the edge to a razor sharpness. In addition, there is no grinding dust to pollute the air. The steel particles are deposited into the water trough. The Tormek method is safe. At the low speed, you can fully control the sharpening.
T8 Specifications:
|
|
|---|---|
| Housing | Cast Zinc Top, Frame, Motor Mount and Internal Drive Wheel with ABS Plastic Sides |
| Grindstone | 250×50 mm (10"×2") |
| Leather honing wheel | 220×31 mm (8 5/8"×1 7/32") |
| Stone diameter indicator | Yes |
| Main shaft, nut and washer in stainless steel |
Yes |
| Carrying handle | Yes |
| Quick coupling for the honing wheel |
Yes |
| Honing with the SE-77 Square Edge Jig on the leather honing wheel |
Yes |
| Motor 115 V 1~ 60 Hz | 200 W (input) |
| Motor duty | Continuous |
| Running speed | 90 RPM |
| Width Depth Height |
270 mm (10 5/8") 270 mm (10 5/8") 330 mm (13") |
| Weight excl. packing | 32.6 lbs |
| Delivered with - Standard Grindstone SG-250 - Leather Honing Wheel LA-220 - Square Edge Jig SE-77 - AngleMaster WM-200 - Honing Compound PA-70 - Leather Wheel Oil - Handbook - Truing Tool TT-50 - Stone Grader SP-650 - T8 Water Trough - Storage Tray T8-00 |
Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes |
| Optional grindstones - Blackstone Silicon SB-250 - Japanese Waterstone SJ-250 - Coarse Diamond DC-250 - Fine Diamond DF-250 -Extra Fine Diamond DE-250 |
Yes, Optional (View) Yes, Optional (View) Yes, Optional (View) Yes, Optional (View) Yes, Optional (View) |
| Warranty | 5 years + additional 3 on registration - Includes commercial use |
Tormek HTK-906 Hand Tool Kit with Classic SVX-150 Scissors Jig
The Tormek Case is a sturdy container with a clear sliding cover and a leather handle. Both stackable and easy to carry, these cases are great for organized storage at home or on the go.
The Hand Tool Kit Storage Tray is made of durable EPP, a durable construction material for years of use. With spots for all the jigs in the hand Tool Kit, the storage tray not only fits the Tormek Case, but is also compatible with the Tormek TS-740 Sharpening Station.
Sharpen Knives, Scissors, Carving Tools, and Axes
The Tormek Hand Tool Kit is for just about anything that is broadly considered a hand tool. It includes the jigs you'll need to sharpen knives, scissors, carving tools, and axes. This kit really extends the usefulness of any Tormek Sharpener.
| Hand Tool Kit Includes | |
|
KJ-45 Centering Knife Jig For most knives. Width 45 mm (1 3/4"). Can be used on long blades. Min blade length 60 mm (2 3/8"). Also for drawknives. |
|
KJ-140 Centering Long Knife Jig Suitable for long and flexible knives. The 140 mm (5 1/2") width of the jig stabilizes a thin blade. Min blade length 160 mm (6 1/4"). |
|
SVM-00 Small Knife Holder Enables you to sharpen the smallest knife blades like carving knives and pocket knives. Works in conjunction with the KJ-45 and the older SVM-45. |
|
SVX-150 Scissors Jig For scissors of all sizes and shears. Also suitable for portable electric hand planer blades. |
|
SVS-38 Short Tool Jig For straight shanked carving gouges and V-tools down to 45 mm (1 3/4") length. Short wood chisels and tools for power carvers. Max. tool width 38 mm (1 1/2"). |
|
AX-40 Axe Jig For carving and carpenter's axes. Will accommodate axe heads from 110mm (4 3/8") to 220mm (8 5/8") long, and 10mm (3/8") to 40mm (1 5/8") thick. |
|
TC-800 Tormek Case Sturdy case, leather carrying handle, clear sliding lid. |
|
HTK-00 Hand Tool Kit Storage Tray Holds all the jigs in the Hand Tool Kit and fits in the Tormek Case. |
Made in Sweden.
Q. Are these jigs compatible with any model Tormek Sharpener?
A. Yes. These jigs will work with both the Tormek T8, the Tormek T4 as well as older models like the T7, T3 and 2000.
